Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop miniature pipette supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

What Is a Miniature Pipette? Fixed-Volume Types and Specs

A miniature pipette is a small fixed-volume hand pipette; see types, volumes, tip fit and manufacturer accuracy limits for 5 to 1,000 µL models.

Written and maintained by CASRAI Editorial Board

Published

On this page

A miniature pipette is a small, pen-sized hand pipette, usually fixed at a single volume between about 5 µL and 1,000 µL, that draws up and dispenses a set amount of liquid through a disposable tip. Manufacturers such as Microlit describe their Lilpet line as designed for test kits and diagnostic kits, and the same name is also used for a smaller adjustable “mini pipette” that covers a range such as 25 to 300 µL.

What a miniature pipette is

The search term covers two related products that vendors both call a mini or miniature pipette. The first is a fixed-volume pipette: one nominal volume per instrument, with no dial to change it. The Microlit Lilpet is the clearest example, sold in separate models for 5, 10, 20, 25, 50, 100, 200, 500 and 1,000 µL, and US Plastic lists a fixed-volume mini pipette family across ten volumes (5, 10, 20, 25, 50, 100, 200, 250, 500 and 1,000 µL). The second is an adjustable mini pipette. SISCO, for instance, lists a plastic adjustable mini pipette with capacities from 25 to 300 µL, colour-coded by capacity and marketed for in vitro diagnostic kits.

Neither is the same as the general term micropipette, which describes any pipette that handles microlitre volumes, including full-size adjustable models with a digital volume display. Nor is it a transfer pipette: a Beral pipette is a disposable plastic dropper that moves liquid by squeezing a bulb and carries no calibrated volume. A miniature pipette is a measuring instrument with a plunger, a tip cone and a stated accuracy, only smaller and simpler than a bench pipette.

Because the instruments are small and low in mechanical complexity, they are made for situations where the same volume is dispensed again and again: kit-based assays, point-of-use tests and teaching or routine work where a fixed volume removes the chance of a mis-set dial. That is an editorial reading of how the products are positioned, not a claim from any one specification sheet.

How it is built and how it works

The Lilpet is described by the manufacturer as a 130 mm instrument that is held like a pipette rather than like a syringe. It has a two-step plunger, and a tip cone on the lower end. US Plastic’s listing for fixed-volume mini pipettes gives the same 130 mm length and two-step plunger. SISCO’s adjustable mini pipette is listed at 12.5 cm and 130 g.

The two-step plunger is the feature that matters most in practice. On a two-step plunger, the first step is the normal working stroke and the second step is a further push for blowing out. Microlit states that the Lilpet’s plunger supports reverse pipetting and last-drop dispensing, and US Plastic states reverse and repetitive pipetting. For the technique itself, see the site’s guide to the reverse pipette method.

The sources read for this page do not name the materials of the fixed-volume instruments, so this page does not either. The SISCO listing describes its adjustable model as plastic.

Types and variants

Variant Volumes listed Key difference Source
Microlit Lilpet (fixed volume) 5, 10, 20, 25, 50, 100, 200, 500, 1,000 µL, one volume per model Calibrated and error limits stated per ISO 8655-2; autoclavable; designed for test kits Microlit product page
US Plastic fixed-volume mini pipettes 5, 10, 20, 25, 50, 100, 200, 250, 500, 1,000 µL Ten volumes; accuracy stated as a range from ±1.5% to 0.5% across the family US Plastic catalogue listing
SISCO mini pipette (adjustable) 25 to 300 µL (capacities 25, 50, 75, 80, 100, 200, 300) Adjustable within a range, colour-coded by capacity, plastic, no accuracy figures given SISCO product page

Fixed-volume miniature pipettes

A fixed-volume instrument is chosen when a procedure always uses the same volume. The nominal volume is set at manufacture and cannot be changed by the user, which is the main way these products differ from the adjustable pipettes that dominate research benches.

Adjustable mini pipettes

SISCO’s adjustable mini pipette covers 25 to 300 µL in its listed capacities. The listing is written for kit assemblers rather than for research use, and it gives no accuracy or precision figures, so it cannot be compared numerically with the fixed-volume products on those terms.

Volumes and accuracy

The only complete accuracy and precision figures found in the manufacturer sources belong to Microlit’s Lilpet. Microlit states that the limits follow DIN EN ISO 8655-2 and are measured with distilled water at equilibrium at 20 °C under smooth, steady operation, and that the pipettes are calibrated in an ISO 17025 accredited laboratory per ISO 8655. The data table below lists, for each model, the nominal volume, the systematic error (accuracy) limit and the random error (coefficient of variation) limit.

Reading the pattern in the table: the smallest volumes carry the widest percentage limits. The 5 µL model is listed at ±2.5% with a 1.5% CV, while the 100 µL and larger models are listed at ±0.8% with a 0.3% CV. That is the usual relationship in pipetting, because a fixed absolute error is a larger share of a smaller volume. It is why a 5 µL pipette should not be expected to behave like a 1,000 µL pipette in percentage terms.

US Plastic summarises its fixed-volume family as accurate from ±1.5% to 0.5%, which is a range across the family and not a limit for a given volume, and it states conformity to ISO 17025 and 8655 for the family. Percentage limits for a specific volume should be read from the manufacturer’s own sheet for the model in hand.

Tips and compatibility

Miniature pipettes take disposable tips, and the tip must fit the cone. Microlit states that on the 5, 10 and 20 µL Lilpet models the tip cone accepts 200 µL micro tips and ultra-micro tips down to 20 µL. US Plastic gives the same statement for its 5, 10 and 20 µL models, which take standard or ultra-micro tips of 20 µL or less. For the larger models, the tip statements in the sources read do not agree closely enough to be repeated here, so the tip size should be taken from the model’s own instruction sheet.

SISCO’s adjustable model is the other case. Its listing says capacities below 200 µL use 200 µL tips and capacities above 200 µL use 1,000 µL tips. Tip fit and general selection are covered more broadly in the site’s pipette tips selection guide.

Autoclaving, calibration and handling

Microlit states that the Lilpet is fully autoclavable at 121 °C and 15 psi for 10 to 15 minutes, and a trade-press product listing repeats those conditions. US Plastic gives the same autoclave conditions for its fixed-volume mini pipettes. That is a manufacturer statement for those models only: it does not apply to every pipette sold as a mini pipette, and the SISCO listing makes no autoclave claim.

Handling advice from the Microlit sheet is brief and practical. Hold the instrument like a pipette, not like a syringe. The error limits quoted by the manufacturer assume smooth, steady plunger operation, so a quick or jerky stroke is outside the conditions under which the figures were measured. For checking performance over time, see the site’s guide to pipette calibration, which covers when and how performance is checked.

Common mistakes

  • Treating a mini pipette as a squeeze dropper. A fixed-volume miniature pipette dispenses a calibrated volume with a plunger; a bulb-style transfer pipette does not.
  • Holding it like a syringe. The manufacturer’s instruction is to hold it like a pipette.
  • Mismatching tip and cone. The small models take micro and ultra-micro tips; the sources do not agree on larger sizes, so the instruction sheet governs.
  • Expecting the same percentage accuracy at every volume. The manufacturer’s own table shows 5 µL at a wider limit than 100 µL and above.
  • Assuming every mini pipette can be autoclaved. The autoclave conditions were stated for the Lilpet and for US Plastic’s fixed-volume listing, not for the whole category.
  • Confusing the fixed and adjustable products. “Mini pipette” is used for both; the volume range and the absence or presence of a dial identify which one a listing describes.

Who uses miniature pipettes

The manufacturers position these instruments for diagnostic and test kits: Microlit and the trade listing say Lilpet is designed for test kits, and SISCO markets its adjustable model for in vitro diagnostic kits. Laboratory staff, kit assemblers and students doing routine fixed-volume dispensing are the natural users. Research groups that vary volumes between experiments generally use adjustable micropipettes instead.

Sources

Data: Microlit Lilpet fixed-volume miniature pipette: accuracy and precision limits by model

Systematic error (accuracy) and random error (coefficient of variation) limits for each Microlit Lilpet fixed-volume model, as stated by the manufacturer under DIN EN ISO 8655-2 test conditions (distilled water, equilibrium, 20 C, smooth steady operation). Compiled from the manufacturer's product page; limits for other brands may differ.

Period covered: 2026.

Microlit Lilpet fixed-volume miniature pipette: accuracy and precision limits by model
ModelNominal volume (µL)Accuracy limit (systematic error) (± %)Precision limit (coefficient of variation) (%)
Lilpet LIL-552.51.5
Lilpet LIL-10101.20.8
Lilpet LIL-202010.5
Lilpet LIL-252510.4
Lilpet LIL-505010.4
Lilpet LIL-1001000.80.3
Lilpet LIL-2002000.80.3
Lilpet MM-5005000.80.3
Lilpet MM-100010000.80.3

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about What Is a Miniature Pipette? Fixed-Volume Types and Specs

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →